One of my sayings is that if I have to do more than spin my seat and get behind the wheel to get underway, that is too much. One of the things we like the least is leveling the RV, so most of the time we don't do it. But if it is really bad, we get out the blocks.
The newer LTVs come with an optional leveling system made to EQ Systems that automagically level the RV using hydraulic jacks. The company sells a kit to put onto your existing RV. I purchased the kit and did the install myself.
It took me about 3 days, I went slow, but the install is largely mechanical. I did have to relocate our propane regulator, but that was the only real change I need to make.
I mounted the pump and valve right in front of the electric step, it is above the step in height from the ground. I also fabricated a protective plate to keep road debris from damaging the plastic hydraulic tank
We used our jacks on our trip in the spring of 2023 and are very happy with how much easier it makes it to park and not have to fool around in the the rain leveling the RV.
Update - December of 2023: One of my jacks (Left Rear) stuck and would not move. I was able to manually operate the valve and it would move. EQ systems sent me a new Solenoid and Valve assembly. It seems to have fixed the issue. I hope this doesn't happen again, it would be harder to fix on the road but at least I know how to manually operate the valves now.
Update - April of 2024: On April 6th, just north of Phoenix when I retracted the jacks, one did not retract, I started to move and heard it, stopped but not before it did some damage. I recycled and it did retract. The damage was it loosened the mount to the frame. I used the jacks sparingly the rest of the trip. When I got home I was able to get a replacement bracket from EQ. Removal of the old bracket required grinding off the expansion bolt, it was a difficult job.
Update - April of 2026: When leaving Uncle Earle's in MN our left front Jack would not retract. After lots of manual manipulation and swearing, I was able to get it to retract. We stopped at EQ Systems on the way home... "they called in a tech and he diagnosed the problem to a bad controller, which he replaced. I paid $3500 for the levelers in 2023, the bill for the controller replacement was $1000! I protested a bit and they made the bill ~$750,"
We continue to have problems, I am currenting trading email with the company. I really don't have time to work it...so it will be a bit.
*********************************
The following is my correspondence with EQ Systems customer support:
We will want to test for voltage right at where the power in stud is coming to the pump.
Thanks,
Alex Halvorsen
Warranty, Service & Parts Lead
EQ Systems | EQ Harness | EQ Logistics | EQ Outdoors | EQ United
19300 Grange Street, Cassopolis, MI 49031
P. (800) 846-9659
From: Fred Jaquish <fjaquish@gmail.com>
Sent: Tuesday, July 7, 2026 11:01 AM
To: Customer Support <customersupport@eqsystems.us>
Subject: Re: [EXTERNAL] Stuck Rear Left Jack.
Hi Alex,
I am currently camping with the RV so can't really safely get under it to measure voltage unless there is a wire at the control panel that I can monitor.
When I get home next week, I can put it up on Jack stands and get under it safely, let me know if there is a specific point you are looking to see the voltage.
Thanks, Fred J.
On Mon, Jul 6, 2026 at 2:36 PM Customer Support <customersupport@eqsystems.us> wrote:
When the jack is not retracting do we still have voltage going to the valve for that jack?
Thanks,
Alex Halvorsen
Warranty, Service & Parts Lead
EQ Systems | EQ Harness | EQ Logistics | EQ Outdoors | EQ United
19300 Grange Street, Cassopolis, MI 49031
P. (800) 846-9659
From: Fred Jaquish <fjaquish@gmail.com>
Sent: Monday, June 29, 2026 7:40 AM
To: Customer Support <customersupport@eqsystems.us>
Subject: Re: [EXTERNAL] Stuck Rear Left Jack.
Alex, This is Fred Jaquish, we met in April when I stopped at EQSystems when I had an issue with my EQSystem levelers. You had a tech replace the control board.
Things were good when I left EQSystems but when I used our RV on Memorial day weekend, it started acting up again.
It is the same issue, the left jack refuses to retract when using auto retract. It takes multiple manipulations of putting down the Jacks manually and retracting manually before it moves. Once it moves it seems to retract normally, it is almost like it is stuck.
I have had issues with these Jacks for sometime. Enough so I made a Spreadsheet of the significant events.
I used them again this past weekend, again the front left takes manual manipulation to make it retract.
I fear that at some point it will just refuse, and I will have to pull a hydraulic line or some other mechanical intervention to be able to drive away.
What do you suggest, I am thinking maybe the cylinder on the left front is tweaked enough so it sticks, especially when it is used on a very unlevel surface?
Thanks, Fred J
****************************************************
UPDATE: 25Aug2026
I finally got time to answer EQ Systems questions,.
| Testing |
EQ Replied that it is a Solenoid....
EQ sold me a new solenoid and valve for around $190, crazy.
| Valve Invoice |
The old one was not fun to get out, but I was lucky that it did not require removing the unit, it was the one valve I had good access to.
![]() |
| Old and New Valve |
Getting the solenoid off the valve was a chore due to the corrosion, I suspect the the rust is squeezing the valve and cause it to work hard....thus the fail.
They also changed the size of the nut on the valve from 7/8" to 15/16" and made it slightly taller. It was just tall enough that my deep well socket would not reach. It was a PIA turning it in with a wrench in a confined space.
![]() |
| New Valve installed with Solenoid |
Installed Valve
All seems to work as it should now. However, I am concerned that the other valves will also fail, only time will tell.
I did contact EQ Systems, and they confirmed that the fail is likely due to corrosion around the valve, but did not offer to provide the upgraded replacements. At nearly $200 per valve, I will wait until they act up before replacing them.






No comments:
Post a Comment