When I upgraded the Serenity Falcon with Lithium Batteries in 2024 I had to remove the Trik-L Start Charger I had installed in 2018 since it was not compatible with Lithium batteries.
This resulted in the Chassis battery no longer being charged when plugged into house power.
Since then I have been putting a trickle charger on the chassis battery when I am going to park it for more than a week.
I finally got around to ordering a Chassis charger, and settled on the House2Start. It was relatively inexpensive and easy to install.
![]() |
| House2Start Gen 2e |
Ordered directly from House2Start
![]() |
| In Bulk Charge Mode |
I tucked it in with the DC to DC charger under the seat behind the driver.
When I installed the DC to DC charger, I installed a isolator switch which requires an active ignition signal before connecting the charger. Since I had this I was able to connect the House2Start on the chassis hot side and not worry about it causing the DC to DC charger to turn on.
We no longer need to worry about running down our chassis batteries when the Serenity sits for more than a few days.


No comments:
Post a Comment